Stone wall cladding bracket bracket system

In practical applications, it is often used in large commercial buildings, public facilities and some residential decoration projects with high requirements for wall quality and stability.

Are you considering using such a system? Or do you have questions about a specific aspect of it?

# Stainless Steel Bracket for Stone Cladding Connection

### 4.4 Stone Installation

Transport the stones to the installation position. Connect the stones to the connection bracket through the pre - drilled holes or slots on the connection bracket. Use special stone adhesives or mechanical fasteners to ensure a firm connection between the stones and the connection bracket.

### 4.5 Adjustment and Inspection

After the stone installation is completed, use measuring tools such as levels and straightedges to check the flatness and perpendicularity of the stone surface. If there are any deviations, adjust them in a timely manner to ensure that the overall installation quality of the stone cladding meets the requirements.

## 5. Quality Inspection

### 5.1 Visual Inspection

The surface of the bracket should be free of obvious scratches, dents, deformations, and other defects. The surface treatment should be uniform, without any signs of incomplete treatment or discoloration.

### 5.2 Dimensional Inspection

Measure the key dimensions of the bracket using measuring instruments to ensure that they meet the design requirements. Brackets with dimensional deviations exceeding the allowable range should be rectified or scrapped.

### 5.3 Welding Quality Inspection

Use non - destructive testing methods (such as ultrasonic testing, magnetic particle testing) to detect the welding parts to ensure that there are no internal defects in the weld seams. At the same time, visually inspect the weld seams. The surface of the weld seams should be smooth and free of cracks, pores, slag inclusions, and other defects.

### 5.4 Mechanical Property Inspection

Select bracket samples according to a certain proportion for mechanical property tests, including tensile tests, bending tests, etc., to ensure that the strength and toughness of the brackets meet the design requirements.

### 5.5 Corrosion Resistance Inspection

Conduct a salt - spray test on the bracket to simulate the corrosion situation in harsh environments and verify the corrosion resistance of the bracket. The salt - spray test time should meet the requirements of relevant standards. After the test, there should be no obvious rust on the surface of the bracket.

## 6. Packaging and Transportation

### 6.1 Packaging

Before packaging, the brackets should be cleaned and treated to prevent damage and contamination during transportation. Use [specific packaging materials, e.g., plastic film, wooden boxes] for packaging to ensure that the brackets are well - protected during transportation.