The installation of marble aluminum pendant should pay attention to the following matters:

1. The angle of the marble pendant bearing in the horizontal plane is a common fault of the bearing device. When fixing the screw, the bearing is not compressed or the gauge gap is too large, the bearing changes under the torque force, and it is easy to leak if it is not corrected.

2. The supporting parts are fixed on the herringbone 30 * 70 * 60 * 2 lining purlin. During the construction of the slab fixed base, the degree, position, skew angle and plane angle of the bearing are controlled by the hub.

3. The aluminum alloy fixed seat matched with the aluminum alloy pendant panel is adopted.

4. Pay attention to the protection of the high rib bottom plate in the process of t-code installation; the power line must be connected to the 220 V protector; safety measures should be taken at the edge; the straightness deviation of the fixed seat installation shall not exceed 2 mm; the horizontal and vertical angle deviation of the fixed seat shall not exceed 1 degree; the height deviation of the fixed seat shall not exceed 5 / 1000 l of the span.