Note the following when installing marble aluminum pendants:

　　1. The angle of the support of the marble pendant in the horizontal plane is a common problem in the support installation. When the fixing screws are fixed, the support is not tightened or the scale gap is too large. The support changes under the torque force. If it is not corrected, it is easy to leak.

　　2. The key process is to install the panel fixing seat and fix the support on the X-shaped 30*70*60*2 lining purlin. During the construction of the panel fixing seat, the horizontal position flow, tilt angle, and plane angle of the support are controlled.

　　3. Use aluminum alloy fixing base that matches the aluminum alloy pendant panel.

　　4. Pay attention to the protection of the high-rib bottom plate during the T-code installation process; the power cord must be connected to a 220V guard; safety measures should be taken on the edges; the straightness deviation of the fixed base installation shall not exceed 2mm; the horizontal and vertical angle deviation of the fixed base shall not exceed 1 degree; the height deviation of the fixed base shall not exceed 5/1000L of the span.